Solicito firmware de TV VIOS TV5019K, placa principal: 35022747, Mstar.
Última edición por un moderador:
Follow along with the video below to see how to install our site as a web app on your home screen.
Nota: This feature currently requires accessing the site using the built-in Safari browser.
El software sería una aplicación de Amlogic para realizar ajustes en modo ingeniero, el firmware sería la distribución del sistema operativo.Ando buscando el software para actualizarla
Muchas gracias. Necesitaba el firmware pero en un comentario tuyo que vi en otro lado vi que ponías a Kazmi Elecom y ahí encontré el firmware que necesitaba.El software sería una aplicación de Amlogic para realizar ajustes en modo ingeniero, el firmware sería la distribución del sistema operativo.
¿Cuál necesitas?
Buenas amigo, intenté de todoClaro, y también es conveniente realizar una búsqueda en Google antes de consultar en un foro.
yo segui esperando el firmware de esta tvSolicito firmware de TV VIOS TV5019K, placa principal: 35022747, Mstar.
Bueno, había dos números que no sabría cual sería el numero de la placa, pero se lo enviaré :Al parecer es un TV reciente. ¿Qué modelo de placa tiene?


UART_115200
AC_ON
MIU1_DQS-OK
BIST0-OK
BIST1-OK
_U
Relocation Offset is: 01700000
[AT][MB][start ub][462]
U-Boot 2011.06-svn6318 (May 09 2018 - 09:20:22)
[SYS][Utopia]: Function = SYSOpen, Line = 1056, current resource pri_shm content is: 0
[SYS][Utopia]: Function = SYSOpen, Line = 1075, [SYS INFO] OPEN INSTANCE...
create instance at 2176E320 with private size 128 bytes at 2176E368
[MIU][Utopia]:
[MIU INFO] miu opencreate instance at 2176E3F0 with private size 80 bytes at 2176E438
create instance at 2176E490 with private size 48 bytes at 2176E4D8
uboot held at [213DDF60~22E00000],size=01A220A0
DRAM: 46 MiB
Now running in RAM - U-Boot at: 22400000
eMMC: HS400 200MHz
eMMC 3.68 GB [75FFF8h]
MPOOL size : 0x200000
u32EnvRescueOffset = 0x174000
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Set MAC default
MAC: 0x0: 0x30: 0x1B: 0xBA:0x2: 0xDB
[AT][MBoot][Driver Init][605]
AC on
MPOOL size : 0x200000
MPOOL size : 0x200000
Changelist: 1046836
============= set bootargs ===============
Hit any key to stop autoboot: 0
fore uup u8KeyPad_KeyVal [0xFF]
AC on
create instance at 217B09C8 with private size 292 bytes at 217B0A10
mmc change mount : CONFIG
Loading file "/PM.bin" at offset 0x0 from mmc device 0 partition CONFIG
24575 bytes read
Wait for PM51 standby...........PM51 run ok...........UART_115200
AC_ON
MIU1_DQS-OK
BIST0-OK
BIST1-OK
_U
Relocation Offset is: 01700000
[AT][MB][start ub][462]
U-Boot 2011.06-svn6318 (May 09 2018 - 09:20:22)
[SYS][Utopia]: Function = SYSOpen, Line = 1056, current resource pri_shm content is: 0
[SYS][Utopia]: Function = SYSOpen, Line = 1075, [SYS INFO] OPEN INSTANCE...
create instance at 2176E320 with private size 128 bytes at 2176E368
[MIU][Utopia]:
[MIU INFO] miu opencreate instance at 2176E3F0 with private size 80 bytes at 2176E438
create instance at 2176E490 with private size 48 bytes at 2176E4D8
uboot held at [213DDF60~22E00000],size=01A220A0
DRAM: 46 MiB
Now running in RAM - U-Boot at: 22400000
eMMC: HS400 200MHz
eMMC 3.68 GB [75FFF8h]
MPOOL size : 0x200000
u32EnvRescueOffset = 0x174000
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Set MAC default
MAC: 0x0: 0x30: 0x1B: 0xBA:0x2: 0xDB
[AT][MBoot][Driver Init][605]
DC on !!
MPOOL size : 0x200000
MPOOL size : 0x200000
Changelist: 1046836
============= set bootargs ===============
Hit any key to stop autoboot: 0
fore uup u8KeyPad_KeyVal [0xFF]
DC on !!
create instance at 217B09C8 with private size 348 bytes at 217B0A10
MOD Output Channel Order not set!!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = tx
MDrv_PNL_Init u32PMRiuBaseAddr = tx
LINK TYPE = EXT
[MHal_PNL_Init_MOD][2591]Vx1 2 division
[MHal_PNL_Init_MOD][2661]Vx1 2 division
[_MDrv_PNL_Init_LPLL][351]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=
2160
[_MDrv_PNL_Init_LPLL][353]u16HTotal=4400,u16VTotal=2250,pstPanelInitData->u16HTotal=440
0,pstPanelInitData->u16VTotal=2250, u16DefaultVFreq=600
@@11=4
[_MDrv_PNL_Init_Output_Dclk][403]pstPanelInitData->u16Width=3840, pstPanelInitData->u16
Height=2160
[_MDrv_PNL_Init_Output_Dclk][405]u16HTotal=4400,u16VTotal=2250,pstPanelInitData->u16HTo
tal=4400,pstPanelInitData->u16VTotal=2250, u16DefaultVFreq=600
@@11=4
@@11=4
[MApi_XC_MLG_GetStatus, 2707]No instance existed, please get an instance by calling MAp
i_XC_Init() first
Init PWM2[AT][MB][panel_pre_init][726]
MPOOL size : 0x200000
R2 Boot from 0x1E900000
[CPU][Utopia]:
[CPU INFO] cpu opencreate instance at 2178E868 with private size 44 bytes at 2178E8B0
[AT][MB][bootlogo begin][1233]
create instance at 217B0B70 with private size 312 bytes at 217B0BB8
[AT][MB][JPD Decode][1332]
[UTOPIA INFO] close moduleNames[tu]: "` @"� @"� @" @"`@"�@"xV4
[showLogo] GOP Boot Logo Index 1
create instance at 217B0B70 with private size 1732 bytes at 217B0BB8
[GOP API][Utopia]:
[GOP INFO] gop opencreate instance at 217B1280 with private size 9596 bytes at 217B12C8
create instance at 217B3848 with private size 1876 bytes at 217B3890
[GOP API][Utopia]: [_GOP_RegisterAllCBFunc][5648] fpSetFBFmt is NULL.(If on STR state,
this is a normal message)
[GOP API][Utopia]: [_GOP_RegisterAllCBFunc][5700] fpEventNotify is NULL.(If on STR stat
e, this is a normal message)
[GOP API][Utopia]: [_GOP_RegisterAllCBFunc][5714] fpXCSetDwinInfo is NULL.(If on STR st
ate, this is a normal message)
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[GOPIoctl][10486]GOP 3 is out of range, so layer 1 is not set.
[_GetBnkOfstByGop][274] Out of GOP support!!! GOP=3
[GOP DRV][Utopia]: [GOP_GWIN_TriggerRegWriteIn][936] GOP not support this GOPType = 3
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[MDrv_SC_Get_GOPOffset, 8352]No instance existed, please get an instance by calling MAp
i_XC_Init() first
[AT][MB][Show Logo][1502]
[AT][MBoot][Boot Nuttx][1504]
## Booting kernel from Legacy Image at 20400000 ...
Image Name: Linux-3.10.40
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3259608 Bytes = 3.1 MiB
Load Address: 20208000
Entry Point: 20208000
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
-usb_stop(USB_PORT3)
Loading Kernel Image ... OK
[AT][MB][start kr][1544]
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
KERN-KERNEL-3.1501829561..2017080414
SAR5=ON
SAR5=ON[AT][KR][reset timer][1787]
mtdoops: mtd device (mtddev=name/number) must be supplied
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,4)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.40 #17
Backtrace:
[<c001200c>] (dump_backtrace+0x0/0x110) from [<c0012a84>] (show_stack+0x18/0x1c)
r6:c056b81c r5:e0cba009 r4:c056b7b4 r3:271ae734
[<c0012a6c>] (show_stack+0x0/0x1c) from [<c0488718>] (dump_stack+0x24/0x28)
[<c04886f4>] (dump_stack+0x0/0x28) from [<c04854e0>] (panic+0xa8/0x1f4)
[<c0485438>] (panic+0x0/0x1f4) from [<c05ee258>] (mount_block_root+0x2cc/0x2d8)
r3:c0a69e84 r2:00000020 r1:c0a69ebc r0:c056b7b4
r7:c06109c0
[<c05edf8c>] (mount_block_root+0x0/0x2d8) from [<c05ee2cc>] (mount_root+0x68/0x6c)
[<c05ee264>] (mount_root+0x0/0x6c) from [<c05ee424>] (prepare_namespace+0x154/0x19c)
r5:c06109d5 r4:c066496c
[<c05ee2d0>] (prepare_namespace+0x0/0x19c) from [<c05edde4>] (kernel_init_freeable+0x1d
4/0x20c)
r5:00000007 r4:c0614e78
[<c05edc10>] (kernel_init_freeable+0x0/0x20c) from [<c04711d8>] (kernel_init+0x14/0x1f8
)
[<c04711c4>] (kernel_init+0x0/0x1f8) from [<c000e4b8>] (ret_from_fork+0x14/0x3c)
r5:c04711c4 r4:00000000
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.40 #17
Backtrace:
[<c001200c>] (dump_backtrace+0x0/0x110) from [<c0012a84>] (show_stack+0x18/0x1c)
r6:c0615dec r5:00000005 r4:00000001 r3:271ae734
[<c0012a6c>] (show_stack+0x0/0x1c) from [<c0488718>] (dump_stack+0x24/0x28)
[<c04886f4>] (dump_stack+0x0/0x28) from [<c00142cc>] (handle_IPI+0x190/0x1a4)
[<c001413c>] (handle_IPI+0x0/0x1a4) from [<c000858c>] (gic_handle_irq+0x60/0x64)
r8:c06640f0 r7:fd400100 r6:c0a8bf70 r5:c062c70c r4:fd40010c
r3:c000f26c
[<c000852c>] (gic_handle_irq+0x0/0x64) from [<c048cdc0>] (__irq_svc+0x40/0x70)
Exception stack(0xc0a8bf70 to 0xc0a8bfb8)
bf60: 00000001 00000000 0000128c 00000000
bf80: c0a8a000 c062c31c c049326c c0a8a000 c06640f0 c06640f0 c0a8a000 c0a8bfc4
bfa0: c0a8bfc8 c0a8bfb8 c000f26c c000f270 60000113 ffffffff
r7:c0a8bfa4 r6:ffffffff r5:60000113 r4:c000f270
[<c000f23c>] (arch_cpu_idle+0x0/0x38) from [<c0063700>] (cpu_startup_entry+0x100/0x14c)
[<c0063600>] (cpu_startup_entry+0x0/0x14c) from [<c0482970>] (secondary_start_kernel+0x
190/0x19c)
r7:c0664cc8 r3:00000000
[<c04827e0>] (secondary_start_kernel+0x0/0x19c) from [<20681ca4>] (0x20681ca4)
r5:00000015 r4:2df7406a
UART_115200
AC_ON
MIU1_DQS-OK
BIST0-OK
BIST1-OK
_U
Relocation Offset is: 01700000
[AT][MB][start ub][462]
U-Boot 2011.06-svn6318 (May 09 2018 - 09:20:22)
[SYS][Utopia]: Function = SYSOpen, Line = 1056, current resource pri_shm content is: 0
[SYS][Utopia]: Function = SYSOpen, Line = 1075, [SYS INFO] OPEN INSTANCE...
create instance at 2176E320 with private size 128 bytes at 2176E368
[MIU][Utopia]:
[MIU INFO] miu opencreate instance at 2176E3F0 with private size 80 bytes at 2176E438
create instance at 2176E490 with private size 48 bytes at 2176E4D8
uboot held at [213DDF60~22E00000],size=01A220A0
DRAM: 46 MiB
Now running in RAM - U-Boot at: 22400000
eMMC: HS400 200MHz
eMMC 3.68 GB [75FFF8h]
MPOOL size : 0x200000
u32EnvRescueOffset = 0x174000
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Set MAC default
MAC: 0x0: 0x30: 0x1B: 0xBA:0x2: 0xDB
[AT][MBoot][Driver Init][605]
AC on
MPOOL size : 0x200000
MPOOL size : 0x200000
Changelist: 1046836
============= set bootargs ===============
Hit any key to stop autoboot: 0
fore uup u8KeyPad_KeyVal [0xFF]
AC on
create instance at 217B09C8 with private size 292 bytes at 217B0A10
mmc change mount : CONFIG
Loading file "/PM.bin" at offset 0x0 from mmc device 0 partition CONFIG
24575 bytes read
Wait for PM51 standby...........PM51 run ok...........
Prueba con este respaldo de eMMC...No logro encontrar por internet algún respaldo compatible, encontré uno extraído con el RT809H pero no me funcionó.